Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Palo Alto, CA | Rowan Construction Group Palo Alto
We provide independent Jerith aluminum fencing and railing service across Palo Alto, from Eichler tracts in Greenmeadow to historic homes in Professorville. What sets our Jerith work apart here is our fluency with Palo Alto’s dual challenge: a 0.45 FAR limit that makes every structural decision count, and an architectural review process that can reject a fence for visible fasteners or finish sheen. Call (650) 446-9092 to schedule your free estimate - we measure twice, write it down, then we talk.
Why Palo Alto Residents Choose Us for Jerith Service
We’ve installed and serviced Jerith aluminum fencing across Palo Alto for over a decade. Grant Rowan, who grew up watching framing crews work the hills above Sunset and later trained in structural framing and project estimating at Los Angeles Trade-Technical College, leads our crew. That background shows up in how we read a Palo Alto lot: we check for post-and-pier foundation movement before we spec gate hardware, and we know which Jerith powder-coat batches match what Professorville’s review board will accept.
We’re not Jerith-authorized, and we don’t pretend to be. We’re independent, code-fluent, and accountable to the homeowner - with background-checked, uniformed technicians and a live person answering calls 24/7. Every visit includes a documented photo record as standard, not an upgrade. Under Clause 1 of the Haven Standard, you get a written flat price before any work starts, and no change proceeds without a signed change order. We’ve delivered over 4,000 projects since 2007 within a few percent of the agreed number, and we intend to keep that record.
Common Jerith Construction Problems We Solve in Palo Alto

- Powder-coat chalking and fading on west-facing runs. Palo Alto’s intense afternoon sun, combined with airborne salt from the baylands, strips the gloss off Jerith Regal and Majestic Series panels faster than inland climates. We see this most on fences along the Charleston Road corridor and other west-exposed lots. OEM color-matched replacement panels are our first choice when the profile is still in production.
- Rack-and-pinion gate sag on sloped Eichler lots. Original nylon rollers wear out, especially where post-and-pier footings shift seasonally. The gate drags, the motor strains, and eventually the aluminum rail twists. We stock aftermarket rollers with higher-load bearings, but if the rail has deformed, replacement is the honest call.
- Post uplift and footing cracking in lower-elevation areas. Expansive clay soils near the baylands heave with winter rain and shrink in summer drought. Jerith posts aren’t engineered for that cycle. We spec deeper footings with engineered base pads, and we document the soil condition with photos before we dig.
- Historic-district color and design non-compliance. Original Jerith panels that met code decades ago now fail Professorville’s architectural review for finish color, height, or visible fasteners. We’ve walked this process with the city - matte black with concealed fasteners is the usual path, but every case is specific.
- Galvanic corrosion at stainless-steel fasteners in coastal fog zones. White rust blooms where dissimilar metals meet, loosening pickets and staining the rail. We isolate the connection with nylon washers and use touch-up powder to seal the breach.
Before
AfterJerith Service in Palo Alto: What Local Conditions Mean for Your Equipment
Palo Alto enforces a strict 0.45 floor-area ratio on standard R-1 lots, so homeowners who want a Jerith fence or gate often must coordinate its footprint with an architect’s FAR-exemption strategy - because a detached fence isn’t counted, but a gate arbor or covered entry can be. If you’re also considering Kitchen Remodeling - Palo Alto or other interior updates, the same FAR planning applies. In Professorville, Jerith installations trigger historic architectural review that limits finish color, height, and visible hardware, so the same panel that sails through in Mountain View may need modification here. This isn’t bureaucracy for its own sake; with land values exceeding $3 million for a teardown lot, every allowable square foot is worth fighting for, and a fence that fails review can delay a whole project cycle. We’ve worked with architects who specifically cantilever additions to preserve ground-level square footage for Jerith perimeter fencing that defines the property line without counting against FAR. The baylands clay and the review board are the two forces every Jerith installation in Palo Alto must answer to.
Jerith Models & Products We Service in Palo Alto

We work with the full Jerith residential and light-commercial lineup: the Regal Series with its 3/4-inch square pickets, the Majestic Series with wider 1-inch pickets and heavier rail, the Titan Series for pool enclosures and high-wind exposures, and Commercial-Grade Aluminum Fencing for multi-family or institutional sites. For Palo Alto’s climate, we stock OEM replacement panels and gates in the most common powder-coat colors - matte black, bronze, and white - plus concealed-fastener kits for historic-district work. When Jerith has discontinued a profile, we source quality aftermarket rollers, hinges, and touch-up powder that match the original spec close enough for repair. If more than 30% of a run shows corrosion or structural fatigue, we’ll tell you straight: full replacement beats piecemeal repair in Palo Alto’s soil and sun.
Our Jerith sales & service page covers our full brand expertise, including how we handle OEM-vs-aftermarket decisions on discontinued lines.
Jerith Service Pricing in Palo Alto
These are the ranges we see on actual Palo Alto jobs, quoted flat with a written scope before work starts:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation (Jerith) | $4,000 - $10,000 |
| Vinyl Fence Installation | $3,500 - $9,000 |
| Driveway Replacement | $5,000 - $14,000 |
What moves the number: linear footage, gate count, soil condition (clay heave means deeper footings), and whether Professorville-style architectural review requires custom finishes or concealed hardware. Many clients who start with fencing later ask us about Bathroom Remodeling in Palo Alto using the same detail-oriented approach. A free estimate includes site measurement, soil assessment, photo documentation of existing conditions, and a written line-item quote with our 365-Day Done Right Promise. Call (650) 446-9092 for an exact quote - estimates are free.
Serving Palo Alto, CA - Our Local Coverage Area

We’re based in the Palo Alto area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Jerith Construction in Palo Alto
Yes, but the finish color, height, and fastener visibility must pass architectural review. Matte black with concealed fasteners is the most common approval path we’ve secured. Call (650) 446-9092 and we’ll review your specific property and the review timeline.
The seasonal heave cracks standard concrete footings and lifts posts out of plumb. We engineer deeper footings with base pads designed for expansive soil, and we document the pre-installation condition with photos. Call (650) 446-9092 for a site assessment - estimates are free.
If the nylon rollers are worn but the rail is straight, we replace the hardware with higher-load aftermarket bearings. If the rail has twisted from years of dragging, replacement is the honest recommendation. We inspect on-site and give you a written price for either path.
Yes, any fence over 3 feet in a front yard or 6 feet in a rear yard requires a permit, and historic districts add a design-review layer. We pull permits as part of our standard process, and we include the permit timeline in your written quote.
Matte and satin finishes show chalking less than gloss, and darker colors hide salt staining better than white or light bronze. We spec AAMA 2604-compliant powder coat for coastal exposure, which carries a longer color-retention warranty than standard residential grade.
Service Areas Near Palo Alto

We serve Palo Alto and surrounding Peninsula communities, including Jerith service in Los Altos for the ranch-home neighborhoods along Foothill Expressway, Jerith service in Mountain View where the permitting cycle moves faster and FAR rules differ, plus Sunnyvale, Woodside, and Cupertino. Each city has its own fence height limits, setback rules, and soil conditions, and we quote accordingly.
Book Your Jerith Service in Palo Alto Today
Call (650) 446-9092 to schedule your free estimate. We’ll measure your lot, assess the soil and sun exposure, and deliver a written flat price before any work starts. That’s Clause 1 of the Haven Standard, and it’s how we’ve kept over 4,000 projects within a few percent of the agreed number since 2007.
Written by Grant Rowan, Owner at Rowan Construction Group Palo Alto, serving Palo Alto since 2007.







Before
After
Before
After
Before
After