Barrette Roofing Nationwide

Barrette Roofing: The Palo Alto Owner’s Guide

Barrette roofing replacement in Palo Alto typically runs $400-$1,800 for repairs and $8,000-$20,000 for full replacement, with most Barrette-compatible components available same-day through our supplier network. We stock common Barrette flashing, ridge vent, and underlayment parts on our trucks, and what we don’t carry we can source within 24 hours through our Palo Alto roofing supplier relationships. Most homeowners discover a Barrette part has failed after spotting water stains on ceiling drywall, finding granules in gutters that match the shingle color, or noticing a ridge vent section lifting during the afternoon wind that comes off the Bay.

Call (650) 446-9092

Which Barrette Models This Applies To

Barrette has manufactured roofing under several series names over the past two decades, and the part you need depends on the production era. Pre-2015 Barrette shingle lines used a 5-inch exposure with a proprietary nail zone, while later series shifted to a standard 5 5/8-inch exposure that matches GAF and Owens Corning fasteners. Check the underside of any loose shingle for a stamped date code and “BAR” prefix, or look for a silver specification label on the ridge vent housing if accessible from the attic.

We source OEM Barrette parts when they’re still in production, but we’ve found that CertainTeed’s Flintlastic SA for low-slope applications and Owens Corning WeatherLock for underlayment meet or exceed original Barrette specs and carry better warranty support. The gotcha in Palo Alto’s market is that Barrette’s coastal-rated fasteners, originally spec’d for salt-air resistance, are now discontinued; we substitute Simpson Strong-Tie coastal-grade fasteners with documented pull-out strength that satisfies Santa Clara County’s wind-uplift requirements. Measure twice, write it down, then we talk.

Signs Your Barrette Roofing Is Failing

• Curling or cupping at shingle edges. This shows the asphalt mat is drying out, accelerated by Palo Alto’s UV exposure and the temperature swing between foggy mornings and 80-degree afternoons. Once the sealant strip loses adhesion, the shingle becomes a wind catcher.
• Granule loss filling gutters. Those granules are the UV shield; when they’re in your downspout, the asphalt underneath is baking. On Barrette shingles from the 2008-2012 production run, we’ve seen this happen at year 12 instead of the rated 20.
• Flashing gaps at wall or chimney intersections. Barrette’s step flashing used a lighter-gauge aluminum in some series that fatigues faster with thermal cycling. The gap lets water run behind the siding, not onto it.
• Sagging or soft spots when walking the roof. This usually means the underlayment has failed and moisture has compromised the OSB or plywood deck. In Palo Alto’s older Eichler and ranch neighborhoods, we’ve found this hidden under seemingly intact shingles.
• Ridge vent tabs breaking or blowing loose. The plastic formulation in certain Barrette ridge vents becomes brittle after 10-15 years of Peninsula sun exposure. A missing tab creates a straight channel for wind-driven rain.

Before

After

Replacement Cost & What’s Included

What drives the range: roof pitch (steeper means more labor), deck condition if we find rot, and whether your Barrette system used the discontinued fasteners that require full redecking prep. Under Clause 1 of the Haven Standard, you get a written line-item price before anyone touches a tool. The quote includes permits pulled, inspections passed, and a documented photo record of deck condition. Our 365-Day Done Right Promise covers the workmanship; material warranties run 25-50 years depending on the replacement line you select.

DIY or Call Us?

There’s a safe middle ground and a hard stop. A homeowner can check the attic for water stains, photograph any visible damage for documentation, and clear gutters of granules to assess how much material is shedding. What you should not do: walk a pitched roof without proper fall protection, attempt to remove and replace shingles in the wind corridor near 280 where gusts hit 35 mph, or handle damaged flashing that may have concealed asbestos-containing mastic in pre-1990 installations.

The real risk with Barrette systems is that the failure you see is rarely the failure that matters. That lifted ridge vent may have been letting water run for two seasons before it showed inside. We find the actual source, quote it in writing, and fix it once. Call (650) 446-9092 to schedule your free estimate.

FAQs