Boral Roofing Nationwide

Boral Roofing: The Palo Alto Owner’s Guide

Boral concrete and clay tile roofing in Palo Alto typically runs $600-$2,500 for targeted repairs and $8,000-$20,000 for full replacement, with most Boral-compatible underlayment and fastener jobs completed in one day. We stock Boral-specific batten clips, eave closures, and high-wind fastening hardware for the Santa Clara Valley wind zone, and we carry the matching color runs for Boral’s popular Saxony Slate and Barcelona profiles on most service calls. Most Palo Alto homeowners discover a Boral part has failed after finding broken tile fragments in the yard following our winter wind season, or noticing a water stain on the ceiling that tracks back to a cracked eave tile the owner never saw from the ground.

Call (650) 446-9092

Which Boral Models This Applies To

Boral’s U.S. roofing line, now produced under the Eagle Roofing Products brand following the 2016 acquisition, covers several distinct profiles still common across Palo Alto’s older ranch neighborhoods and newer builds alike. The Saxony Slate (flat, 18-inch simulated slate), Barcelona (low-profile S-tile), Malibu (two-piece Mission tile), and Villa 900 (high-profile barrel tile) all use proprietary fastening systems that differ in batten spacing, clip gauge, and head exposure. We identify the correct replacement part by the ink-stamped production code on the tile underside, usually located near the tail edge, and by measuring the exposed head width to the nearest eighth-inch. OEM Boral/Eagle clips and foam closures remain available through regional distributors, though we also source aftermarket equivalents from Ludowici and MCA when the lead time on factory parts exceeds the dry-window requirement. The compatibility gotcha in Palo Alto: post-2010 Boral tiles switched from a 0.032-inch to a 0.040-inch aluminum clip gauge, and mixing the two on the same batten creates a shadow line visible from the street.

Signs Your Boral Roofing Is Failing

• Cracked or missing tile at the eave or hip line. Boral concrete tile absorbs moisture over decades, then fractures when Palo Alto’s freeze-thaw cycles hit the waterlogged edge. The underlying felt underlayment, not the tile itself, is doing the actual waterproofing at that point.
• Staining on the soffit or fascia board beneath the roof edge. This usually means the eave closure, the foam or metal strip that seals the gap between the first course of tile and the fascia, has compressed or blown out, letting wind-driven rain run behind the gutter.
• Tile that sounds hollow when tapped or rocks underfoot during a roof walk. The mortar bed or foam adhesive has delaminated from the tile, often from thermal cycling in our 40-degree summer-winter spread, and the tile is no longer mechanically locked.
• Granular debris collecting in gutters that matches the tile surface texture. Boral’s color-through concrete wears at the nose and head where foot traffic and water converge; heavy granule loss means the protective surface layer is gone and the body is eroding.
• Light visible from the attic through the tile gaps on a sunny day. The underlayment has torn at the batten penetration or the batten itself has rotted, a common issue in Palo Alto where redwood battens installed before 1995 often failed before the tile did.

Before

After

Replacement Cost & What’s Included

For Boral-specific repairs in Palo Alto, we quote by the scope, not by the square foot. A localized tile replacement with matching inventory runs $600-$1,200, including removal of damaged courses, underlayment patch at the failure point, new batten if needed, and reinstall with color-matched Boral or Eagle tile. Underlayment replacement on a Boral tile roof, which requires removing and resetting the full field, ranges $4,500-$8,500 for a typical 2,500-square-foot Palo Alto home. Full Boral tile roof replacement with new underlayment, battens, and tile runs $8,000-$20,000 depending on roof complexity, access, and whether we are matching a discontinued color run. Every quote is a flat written price with line-item parts and labor before work starts, per Clause 1 of the Haven Standard. Our 365-Day Done Right Promise covers the workmanship, and we document the existing condition with a photo record you receive before we leave.

DIY or Call Us?

An owner can safely check for missing tile from the ground with binoculars and photograph any visible cracks for our review. What you should not do: walk a Boral tile roof without proper hook ladder and ridge staging. Concrete and clay tile break under concentrated load, and the breakage pattern is unpredictable. More critically, tile roofing has no structural redundancy; one cracked tile underfoot can send you through the underlayment into the attic space. We have replaced tile that a homeowner cracked during a “quick look,” then compounded the damage by trying to seal it with roofing cement that trapped moisture and accelerated the underlying wood rot. For Boral tile, the fastener torque spec matters, the foam closure placement matters, and the head lap dimension matters. Measure twice, write it down, then we talk. Call (650) 446-9092 and we will walk through what you are seeing before anyone climbs.

FAQs