Therma-Tru Fence Installation Nationwide

Therma-Tru Fence Installation: The Palo Alto Owner’s Guide

We stock and install Therma-Tru-compatible fence systems in Palo Alto with typical installed pricing from $3,500 to $9,000 depending on linear footage, terrain, and whether we’re matching existing posts or starting fresh. Most Therma-Tru fence projects we quote in Palo Alto are measured, priced in writing, and scheduled within a week. Homeowners usually discover their fence needs attention when gate panels start sagging, post caps loosen after winter rains, or the composite boards show UV chalking along the south-facing sections near Old Palo Alto.

Call (650) 446-9092

Which Therma-Tru Models This Applies To

Therma-Tru fences ship in several series, and the parts are not cross-compatible. The Estate Series uses 4×4 aluminum posts with a proprietary bracket system; the YardScapes line relies on routed vinyl posts with internal steel stiffeners. Check the inside of your gate frame for a stamped model code, usually on the hinge-side rail. If the stamp is worn, measure the wall thickness of the post: Estate Series runs 0.125-inch aluminum, while YardScapes vinyl posts measure 0.150-inch wall thickness with a visible internal rib pattern.

We source OEM Therma-Tru hardware for warranty-matched jobs and keep quality aftermarket equivalents on the truck for older discontinued series. The aftermarket brackets fit, but the powder coat rarely matches the original Therma-Tru color codes exactly. In Palo Alto’s sun exposure, that color mismatch becomes visible within 18 months on south-facing yards. We note the OEM versus aftermarket choice on every written quote so you’re not surprised at the gate.

Signs Your Therma-Tru Fence Installation Is Failing

• Gate sag or latch misalignment. The aluminum frame has twisted at a corner joint, usually from repeated wind loading against a locked gate. Palo Alto’s afternoon gusts off the Bay accelerate this failure mode.
• Post cap separation or water intrusion. The cap gasket dries out and shrinks, letting water track down the post interior. We see this most on fences installed before 2018, when Therma-Tru changed the gasket compound.
• Composite board face-checking or splintering. UV degradation breaks down the surface cap layer. South- and west-facing runs in Palo Alto show this first, often within 8 to 12 years depending on the board series.
• Rail bowing between posts. The internal steel stiffener has corroded or the bracket has pulled free from the post. Clay-heavy soils in the Palo Alto foothills shift more than valley fill, stressing post footings.
• Hinge squeal or grinding. The self-lubricating bushing has worn through to metal-on-metal contact. Left alone, this galling destroys the hinge pin and the mounting bracket.

Before

After

Replacement Cost & What’s Included

What drives the range: linear footage, soil condition for post footings, and whether we’re matching an existing discontinued color. Every quote lists parts and labor as separate line items. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation; OEM parts carry the manufacturer’s warranty.

DIY or Call Us?

An owner can safely check hinge torque and post cap condition with a socket set and a ladder. Do not attempt to reset a leaning post or cut into a composite rail without knowing what’s inside. The YardScapes series conceals a steel stiffener that binds aggressively with a standard wood blade; the aluminum posts in the Estate Series require specific self-tapping screws that strip easily with the wrong driver.

We bring the right fasteners, the post-leveling rig, and the bracket jig. Measure twice, write it down, then we talk. Call (650) 446-9092 to schedule your free estimate.

FAQs